MF02

Plan 1 - 填充

說明: 
Try to using the three-plate mold to insert the plastic into the front of side. Then use 2 entry points for large size product and 1 entry point for small size product.

材料:

PP

重量:
20.8g+1.8g

填充(中心射壓):
113

翹曲(Z最大):
+1.1
-1.5

MF02

Plan 1 - 翹曲

說明: 
Try to using the three-plate mold to insert the plastic into the front of side. Then use 2 entry points for large size product and 1 entry point for small size product.

材料:

PP

重量:
20.8g+1.8g

填充(中心射壓):
113

翹曲(Z最大):
+1.1
-1.5

MF02

Plan 2 - 填充

說明: 
For saving raw material, all of the size product use only 1 entry point and also use different sizes to adjust the balance.

材料:

PP

重量:
20.8g+1.8g

填充(中心射壓):
94

翹曲(Z最大):
+1.2
-1.5

MF02

Plan 2 - 翹曲

說明: 
For saving raw material, all of the size product use only 1 entry point and also use different sizes to adjust the balance.

材料:

PP

重量:
20.8g+1.8g

填充(中心射壓):
94

翹曲(Z最大):
+1.2
-1.5

MF02

Plan 3 - 填充

說明: 
For saving more raw material, change into two sides of submarine gates which the injection pressure and amount of deformation are relatively small.

材料:

PP

重量:
20.8g+1.8g

填充(中心射壓):
83

翹曲(Z最大):
+1.0
-1.4

MF02

Plan 3 - 翹曲

說明: 
For saving more raw material, change into two sides of submarine gates which the injection pressure and amount of deformation are relatively small.

材料:

PP

重量:
20.8g+1.8g

填充(中心射壓):
83

翹曲(Z最大):
+1.0
-1.4

MF02

Plan 4 - 填充

說明: 
Considering the volume difference between the two products is too large. In order to facilitate adjustment during actual production, the flow path of the small product is elongated.

材料:

PP

重量:
20.8g+1.8g

填充(中心射壓):
120

翹曲(Z最大):
+0.9
-1.4

MF02

Plan 4 - 翹曲

說明: 
Considering the volume difference between the two products is too large. In order to facilitate adjustment during actual production, the flow path of the small product is elongated.

材料:

PP

重量:
20.8g+1.8g

填充(中心射壓):
120

翹曲(Z最大):
+0.9
-1.4